1. Kan inte till visa siffror korrekt
2. The gas detector cannot inhale
This type of problem mainly occurs on pump-suction gas detectors. A small aspirating pump inside the detector is used to inhale gas for detection. Once the aspirating pump is damaged or other failures, the gas detector will not be able to inhale. This problem is easy to solve, just replace the aspirating pump with a new one.
3. Gas detector failure
1. till check regelbundet, don't glöm till kalibrera och impact test.
2. Keep away from moisture, rain and corrosive liquids, and ensure that the surface of the instrument is clean and dry.
3. Do not hit or shake the machine strongly, nor drop it or use it th ungefär.
4. Filtret papper bör vara ersättas regelbundet.
Gas detektor underhåll försiktighetsåtgärder
1. Check the gas flow rate, the value should not be too large or too small.
2. Kontrollera om det finns någon luft läckage in den gas systemet.
3. The sampling probe is cleaned, and the pipeline of the sampling hole is dredged.
4. Kontrollera om kondensorn fungerar normalt, och vanligtvis justera den temperatur inom 3 grader Celsius.
5. Check the measuring chamber to see if it is dirty, and clean it in time.
