Driftsmetod för stifttyp Träfuktdetektor
1. Gear setting method: first press the gear setting key (SPECIES), then press the test key (TEST), the current gear value is displayed at this time, press the setting key continuously, you can continuously change the gear until you need it. 's gear.
2. Check before measurement: Set to 5th gear according to the above method, then remove the cap of the instrument, touch the probe on the instrument to the two contacts on the cap, press the test key, if the display is 18±1, it means The instrument is normal.
3 Bestämning: Sätt in sonden på instrumentet i träprovet som ska bestämmas. Tryck på testknappen, värdet som visas av instrumentet är den genomsnittliga absoluta fukthalten i testbiten. När fukthalten i provbiten är mindre än 3 kommer den att visa 3.0.
